Thursday, January 12, 2012

What to Do after a Tooth Extraction?

!±8± What to Do after a Tooth Extraction?

After an extraction, it's important for a blood clot to form to stop the bleeding and begin the healing process. That's why your dentist will ask you to bite on a gauze pad for 30 to 45 minutes after an extraction. If bleeding or oozing continues after you remove the gauze pad, place another gauze pad on the area and bite firmly for another 30 minutes. You may have to do this several times.

After the blood clot forms, it's important to protect it, especially for the next 24 hours. It's important to not:

o smoke and chew tobacco

o drinking alcohol

o suck through a straw

o rinse your mouth vigorously

o clean the teeth next to the extraction site

These activities could dislodge the clot and slow down healing.

Limit yourself to calm activities for the first 24 hours. This keeps your blood pressure lower, reduces bleeding, and helps the healing process.

After the tooth is extracted, you may feel some pain and have some swelling. You can use an ice bag (20 minutes on, 20 minutes off) to keep this to a minimum. The swelling usually starts to go down after 48 hours.

To control discomfort, take pain medication as recommended. Don't take medication on an empty stomach or nausea may result. If antibiotics are prescribed, continue to take them for the indicated length of time, even if all symptoms and signs of infection are gone. Also:

o Drink lots of fluids.

o Eat only soft, nutritious foods on the day of the extraction.

o Don't use alcoholic beverages.

o Avoid hot and spicy foods.

You can begin eating normally the next day, or if not by then, as soon as it's comfortable. Gently rinse your mouth with warm salt water three times a day (put a teaspoon of salt in a cup of warm water, and then gently rinse, swish, and spit). Also, rinse gently after meals. This helps keep food out of the extraction site.

It's very important to resume your normal dental routine after 24 hours. This should include brushing your teeth and tongue and flossing at least once a day. This will speed healing and help keep your breath and mouth fresh. Call your dental office right away if you have heavy bleeding, severe pain, continued swelling after two or three days, or a reaction to the medication. After a few days, you'll be feeling fine and can resume your normal activities.

Dry socket is an infection in your tooth socket after a tooth is extracted. The condition usually develops when a blood clot fails to form in the socket, or if the blood clot comes loose. Dry socket occurs in approximately 5 percent of all tooth extractions.

Normally, the blood clot that forms after a tooth is removed promotes healing, laying the foundation for the growth of new bone tissue. When dry socket occurs, this blood clot is lost and the infected, inflamed socket appears empty - hence the name. Nerves are exposed, and sometimes the bone is visible in the empty socket.

You may not have symptoms until 3 to 5 days after the extraction. Then, the condition will manifest itself as severe pain that doesn't subside, often accompanied by what feels like an earache. You may also have an unpleasant taste in your mouth, and bad breath. Call your dentist right away if you notice any symptoms of dry socket. Treatment for dry socket typically includes a gentle rinsing of the socket and dressing the socket with sedative medication.


What to Do after a Tooth Extraction?

Aveeno Positively Smooth Moisturizer Save

Sunday, January 1, 2012

Make Up Techniques to Create a Corpse Bride

!±8± Make Up Techniques to Create a Corpse Bride

Dressing like a Corpse on a Halloween does not just need a dress and acting like a zombie when you walk. You have to look scary and the best way to look like a real Corpse bride is to put on some make-ups of bruises and bloods all over your body. Here are some techniques on how to achieve those Halloween bruises and faces.

Looking like a Corpse

A Corpse Bride would really compliment a woman better than any other Halloween costume. You just need a tattered white dress and paint yourself like a zombie. Use theatrical greasepaint and apply it to your face and lips. Then apply thick rings around your eyes using a dark eye shadow and eyeliner to make your eyes look bigger and wider. You can also add some fake blood and some bruises in some areas of your body.

Adding Fake Blood

You will need a corn syrup you found from the grocery store, food coloring of red and blue, and peanut butter. Add food coloring to your corn syrup until the desired color is achieved. If you want a thinner blood, add water but if you want your blood to be thicker use peanut butter as expander. But if you are allergic to nuts, you better not use the peanut butter at all; or just put on the areas away from skin. You may use chunky peanut butter to appear like it has blood clots in it.

Creating Fake Bruises

One of the basic make up tricks for Halloween Corpse Bride costumes is the bruising. You will need a brush, eye shadow make up of blue, grey and green colors, make up brush and a sponge. Wet an end of a make-up brush and apply a dot of blue eye shadow powder on the desired place. Then, use your finger to spread the blue eye shadow and add color gray. Then, using a brush, apply the color green eye shadow on the edges of your bruise. Then, use a sponge or your finger to spread the bruise and create a character.


Make Up Techniques to Create a Corpse Bride

Floor Lamps Torchiere Order Now

Monday, December 26, 2011

Stained Glass Kits - 12 Essential Items For Making Leaded Glass Panels

!±8± Stained Glass Kits - 12 Essential Items For Making Leaded Glass Panels

Do you want to learn how to make stained glass but faced with a confusing array of stained glass tools and materials? Here's the top 12 essentials for a stained glass kit, with buying tips and brief user descriptions to help your stained glass career take off without a hitch. All are available at any good stained glass suppliers.

Cutting

1 Oil-filled cutter. There's lots of different types of cutter, but make sure you buy one that has a reservoir for oil. This automatically lubricates the tugsten carbide wheel as you make your scoreline, which saves you from constantly having to dip it in oil. Buy an oil-filled pistol grip cutter if you think you might have trouble applying pressure with a pen-shaped cutter.

2 Grozing Pliers. A tool specifically made for stained glass, the grozier is used for breaking difficult cuts and nibbling the edges of glass.

Leading

3 Lead knife. You'll need to cut those 6ft lengths of lead accurately, so buy a dedicated stained glass lead knife and keep it sharp.

4 All Nova Tool or Fid. Silly names, but it's actually one of the most useful - and cheap! - tools in your stained glass kit. Use it to open up the lead cames before leading, and to close them down after cementing.

5 Lead Vice. You could trap lead cames in your door before stretching it, but instead, keep your partner happy by investing in a lead vice. It grips one end of the lead whilst you tug on the other with pliers. Hold on tight!

6 Horse Shoe Nails. These have been stolen from blacksmiths - they use them to bang into horses hoofs, we use them for holding in place all those really annoying bits of lead that pop out all over the show when you're leading up.

Soldering

7 Tallow Candle. These are made of animal fat and are used as a flux for the solder. Rub a bit on to each lead join before you solder. Think roast beef!

8 100W Soldering Iron. Try to get a soldering iron with a thermostat, as it won't melt you're carefully cut lead. My students have tried both gas and 200W soldering irons over the years, but the general consensus is that the 100W is the easiest to handle, and powerful enough for any soldering job.

9 Grade C Solder. Made sure you buy solder that's 60% lead and 40% tin for leaded stained glass work. Try to work in a well ventilated area when soldering - along with everything else related to stained glass, it's dangerous!

Cementing and Polishing

10 Leaded Light Cement. Strictly speaking this isn't exactly an essential, as you can make this up a lot cheaper with standard putty, white spirit and black powder paint. But I don't want to put you off with that hideous messy job right at the beginning - so buy a pot of ready made cement for starters.

11 Whiting. Used for absorbing all the mess made by the cement. Just sprinkle it over your panel and brush it off. Use some muscle.

12 Black Grate Polish. Use a shoe brush to shine your leads to twinkly perfection. Stand back and admire.

I admit it, I cheated. Top marks if you've spotted the two vital missing items in this otherwise most comprehensive of stained glass kits - glass and lead! But that's the fun bit and for you to enjoy - gazing in wonder at all the different types of glass, the amazing array of textures and colours, and imagining the creative possibilities ahead...bliss!


Stained Glass Kits - 12 Essential Items For Making Leaded Glass Panels

Cheap Gansevoort Michael Kors


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links